Your 2020 Entegra Coach Emblem Motorhome is manufactured on the Ford F-53 chassis. The steering stabilizer needed will depend on the engine and GVW of your coach.
The recommended Reflex Steering Stabilizer is part # RM-RBK25-RSSA for coaches with a 24,000 GVW and heavier. If your chassis has the V-10 engine that's NOT a 24,000 or 26,000 GVW, use # RM-RBK22-RSSA. If your coach doesn't meet either of these parameters, please reply with the exact model of your coach and I'll do some further... view full answer...
Currently Lasalle Bristol does not offer a replacement lens for the Gustafson 12V RV LED Puck Light GSL9538 # 277-000344. You would need to get the entire light or switch to a different light like the Command Electronics # 328-K-58L34P9 which offers a Replacement Lens # CE54FR. Do note the Command Electronics is only 4-1/4" diameter versus 4-1/2" on your Gustafson. view full answer...
Rain gutter extenders are more of a universal item that fit all trailers. The RV Extended Rain Gutter Spouts # 372655-BK-A will install at the end of your gutter rail. Simply remove the screw closest to the end of the rail and cut through the caulking to lift the rail away from the wall of the trailer.
You can then place the gutter behind the rail and secure the rail back in place with the screw also going through the extender. Once they are secured in place you can reseal them with some... view full answer...
The Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 is the correct part for your car hauler if you have 2-3/8" diameter axles. If you have a 3" axle then you need the # K71-385-00 instead. You will need two kits, one per axle. This does not require welding for installation, check out the installation video below so you can see what the process is like. view full answer...
For your 2020 Entegra Coach Emblem Motorhome I recommend replacing your factory hitch with the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 so that you can safely flat tow your Jeep Gladiator.
This trailer hitch receiver has a 16,000lb towing capacity and will fit a frame width of up to 44". You'll want to measure the distance between your frame beams to ensure proper fitment. view full answer...
Go To Results